Sealant and mastic take-off from your drawings
Sealant is priced by the linear metre, and measuring every frame perimeter and movement joint off a multi-storey elevation by hand is slow. QuantRead reads the elevations, counts the openings and works out the joint metres for you, showing how each figure was got.
Try it free – 1 drawing, up to 3 pages
What QuantRead measures for sealant and mastic
- Window perimeter joints (m), one bead unless the drawing says otherwise
- Door perimeter joints (m)
- Movement and expansion joints (m)
- Cladding and spandrel panel joints (m)
- Bath, shower, basin and worktop seals (m)
- Floor and concrete joints (m)
- Openings counted (nr) and service penetrations for fire-stopping (nr)
Profile in the app: “Sealant applicator (joints and penetrations)”. Every result also shows the scale used, how each line was measured, and a check-on-site list.
How the joint metres are worked out
For each opening, the perimeter is 2 × (width + height). QuantRead reads the width and height from the schedule or written dimensions first, and only scales from the drawing when nothing is written. Sizes it had to assume are flagged ASSUMED with low confidence, so you know which lines to check before you price.
Internal and external beads are kept apart where the drawing shows both, and curtain-wall bays are listed on their own line rather than mixed into window counts.
From metres to cartridges
Once you have the metres, cartridges follow from the joint size. A 10 mm × 10 mm joint has a cross-section of 100 mm², so a 310 ml cartridge (310,000 mm³) fills about 3.1 m before waste. Our guide on measuring mastic from drawings has a table for other joint sizes.
Worked example (illustrative)
A three-storey elevation shows 24 windows tagged W01 at 1,200 × 1,500 mm and 3 doors at 1,000 × 2,100 mm.
| Line | Working | Qty |
|---|---|---|
| Window perimeters | 24 × 2 × (1.2 + 1.5) | 129.6 m |
| Door perimeters (sides and head) | 3 × (2.1 + 2.1 + 1.0) | 15.6 m |
| Total external bead | 129.6 + 15.6 | 145.2 m |
| 310 ml cartridges at 10 × 10 mm, before waste | 145.2 ÷ 3.1 | 47 nr (46.8 rounded up) |
Sealant and mastic take-off questions
- Does it measure both the internal and external bead?
- Only where the drawing or specification shows both. Otherwise it measures one bead and says so, so you can double it if your scope includes the internal seal.
- Can it pick out movement joints on an elevation?
- Yes, where they are drawn or dimensioned. Each run is listed separately with its length, so you can check them one by one.
- Will it tell me which sealant to use?
- No. QuantRead measures quantities only. Product choice, joint design and colour stay with you and the specification.
Measure your next sealant and mastic job
Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.
Used for sealant and mastic work across the UK
- Sealant and mastic take-off in London
- Sealant and mastic take-off in Manchester
- Sealant and mastic take-off in Glasgow
- Sealant and mastic take-off in Bristol
- Sealant and mastic take-off in Brighton
- Sealant and mastic take-off in Aberdeen
- Sealant and mastic take-off in Ipswich