Roofing

Roofing take-off from roof plans and elevations

Roof plans show you the area on plan, but you price the slope. QuantRead reads the pitch from a section or elevation, corrects the area for it, and lists every linear run a roofer prices.

Try it free – 1 drawing, up to 3 pages

What QuantRead measures for roofing

  • Roof area on plan (m²), flat and pitched kept apart
  • Roof area on slope, pitch-corrected (m²)
  • Ridges, hips and valleys (m)
  • Eaves and verges (m)
  • Gutters (m) and downpipes (nr)
  • Rooflights (nr)

Profile in the app: “Roofing”. Every result also shows the scale used, how each line was measured, and a check-on-site list.

The pitch correction

Slope area = plan area ÷ cos(pitch). At 35°, cos is about 0.819, so 80 m² on plan is about 97.7 m² on the slope. If the pitch is not written anywhere, the slope area is flagged as assumed. More in how to work out roof area from plans.

Worked example (illustrative)

A simple gable roof: 10 m × 8 m on plan, 35° pitch, ridge along the 10 m side.

LineWorkingQty
Area on plan10 × 880.0 m²
Area on slope80 ÷ cos 35°97.7 m²
Ridgelength of building10.0 m
Eaves (both sides)2 × 1020.0 m
Verges (4 rafters)4 × (4 ÷ cos 35°)19.5 m

Roofing take-off questions

Can it handle hipped and valleyed roofs?
Yes, where the roof plan draws the hips and valleys. Each run is listed so you can check its length.
Does it work out tiles or slates?
It gives the slope area. Tiles per m² depend on the product and gauge, so you apply that from the manufacturer’s data.
Can it read flat roof areas?
Yes. Flat and pitched areas are listed separately where the drawing shows both.

Measure your next roofing job

Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.

Try it free – 1 drawing, up to 3 pagesSee pricing

Used for roofing work across the UK

Who uses roofing take-off

Other trades

Roofing Take-Off: Roof Area, Ridges & Hips | QuantRead