Brickwork

Brickwork take-off: wall areas, lintels and DPC from your drawings

For bricklayers and groundwork-to-roof builders, QuantRead measures facing brick and block areas from the elevations, takes the openings off, and counts the lintels over them.

Try it free – 1 drawing, up to 3 pages

What QuantRead measures for brickwork

  • Wall area by type, less openings (m²)
  • Lintels (nr)
  • DPC length (m)
  • Movement joints (m)

Profile in the app: “Brickwork”. Every result also shows the scale used, how each line was measured, and a check-on-site list.

Bricks per square metre

With standard UK bricks (215 × 102.5 × 65 mm) and 10 mm joints, a half-brick wall takes about 60 bricks per m². A 440 × 215 mm block takes about 10 per m². Apply these to the net areas, then add your own allowance for cuts and breakages. Full method in how many bricks you need from a drawing.

Worked example (illustrative)

A front elevation 9.0 m wide × 5.4 m to eaves, with 6 windows of 1.2 × 1.2 m and a door of 1.0 × 2.1 m, in facing brick.

LineWorkingQty
Gross area9.0 × 5.448.60 m²
Less openings6 × 1.44 + 2.1010.74 m²
Net facing brick48.60 − 10.7437.86 m²
Bricks before waste37.86 × 602,272 nr (2,271.6 rounded up)
Lintelsone per opening7 nr

Brickwork take-off questions

Does it split facing brick from blockwork?
Yes, where the elevations or sections show different wall types, areas are split by type.
Can it measure gable ends?
Yes. The triangular gable area is measured from the elevation where the pitch or ridge height is shown.
Does it count bricks directly?
It measures net areas. Bricks follow from your brick size and bond, so you stay in control of that number.

Measure your next brickwork job

Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.

Try it free – 1 drawing, up to 3 pagesSee pricing

Used for brickwork work across the UK

Who uses brickwork take-off

Other trades

Brickwork Take-Off from Plans & Elevations | QuantRead