Guides

How do I do a take-off from PDF drawings?

Short answer: Check the scale on the title block against a written dimension, list the items your trade prices from, then measure lengths, areas and counts sheet by sheet, writing down how you got each figure. Total them in a schedule, flag anything assumed, and check it against the site before you order.

1. Get the right drawings

Make sure you have the latest revision of every sheet you need: plans for areas and room perimeters, elevations for openings and facades, sections for heights, and any schedules (windows, doors, finishes). Check the revision letter in the title block against the drawing register if there is one.

2. Confirm the scale

Read the scale in the title block, for example 1:100 @ A1, and note the paper size it applies to. If the PDF will be printed or viewed at another size, the scale changes. Then check it: measure a written dimension on the drawing and make sure your scaled figure matches. Our guide How do you scale a PDF drawing to measure it? covers this in detail.

3. List what you are measuring

Write the items your trade prices from before you start, with units: m for runs, m² for areas, nr for counts. A drylining list might be partitions (m), wall boarding (m²), ceilings (m²) and beads (m). A sealant list might be window perimeters (m), door perimeters (m) and movement joints (m).

4. Measure sheet by sheet

  • Use written dimensions first. They beat anything you scale.
  • Scale only when nothing is written, and note that you did.
  • Count symbols against the legend and mark each one off as you go.
  • Keep a separate line for anything you had to assume, such as a ceiling height.

5. Record your working

Write how each figure was got, for example “24 × 2 × (1.2 + 1.5) = 129.6 m”. When a client queries a number, or the drawings are revised, you can update it in minutes instead of re-measuring.

6. Check, then add waste

Quantities from drawings are net. Add waste and cuts in your price, not in your measure, so you can see them. Then list the things to check on site before ordering: actual opening sizes, heights, hidden services.

Doing it faster

This is exactly the process QuantRead automates: it reads the scale, measures for your trade, shows how each figure was got and gives you a check-on-site list. You still review it, but you are not clicking every line.

Tags: take-off, PDF drawings, estimating

Let QuantRead do the measuring

Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.

Try it free – 1 drawing, up to 3 pagesSee pricing

Related posts

All posts · FAQ · Take-off by trade

How do I do a take-off from PDF drawings? | QuantRead