Tiling
Tiling take-off: floor and wall tile areas from your drawings
QuantRead measures floor tiling by room and finish and wall tiling areas where the drawings show them, such as bathroom and kitchen elevations.
Try it free – 1 drawing, up to 3 pages
What QuantRead measures for tiling
- Wall tiling areas (m²)
- Floor area by room and finish (m²)
- Perimeters and edge trims (m)
- Thresholds (nr)
Profile in the app: “Tiling”. Every result also shows the scale used, how each line was measured, and a check-on-site list.
Wall tiling needs elevations
A floor plan alone shows where tiling goes but not how high. Upload the room elevations or a tiling layout and QuantRead measures the wall areas to the heights shown. Without them, heights are assumed and flagged.
Worked example (illustrative)
| Room | Working | Qty |
|---|---|---|
| Bathroom floor | 2.4 × 2.0 | 4.80 m² |
| Bathroom walls, full height 2.4 m | (2 × (2.4 + 2.0)) × 2.4 − door 0.8 × 2.0 | 19.52 m² |
| Kitchen splashback | 3.6 m × 0.6 m | 2.16 m² |
Tiling take-off questions
- Does it set out tiles?
- No. It gives areas. Setting out and cuts are your call.
- Can it take off wet rooms?
- Yes, floor and wall areas are measured where the drawings show them. Tanking is priced from the same areas.
- Does it include waste?
- No, all areas are net.
Measure your next tiling job
Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.