Joinery and carpentry
Joinery and carpentry take-off from plans
Second-fix joinery is all counts and linear metres. QuantRead counts doors by size and fire rating and measures skirting, architrave and kitchen runs from your plans.
Try it free – 1 drawing, up to 3 pages
What QuantRead measures for joinery and carpentry
- Internal doors and frames by size and fire rating (nr)
- External doors (nr)
- Skirting (m)
- Architrave (m)
- Staircases (nr)
- Kitchen unit run length (m)
Profile in the app: “Joinery / carpentry”. Every result also shows the scale used, how each line was measured, and a check-on-site list.
Fire doors
Where the door schedule or plan marks FD30 or FD60 doors, they are counted separately so the price difference does not get lost.
Worked example (illustrative)
| Line | Working | Qty |
|---|---|---|
| Internal doors 838 × 1,981 mm | counted | 14 nr |
| of which FD30 | from schedule | 4 nr |
| Architrave, both sides | 14 × 2 × (1.98 + 1.98 + 0.84) | 134.4 m |
Joinery and carpentry take-off questions
- Does it take openings off skirting?
- No, skirting is measured on full room perimeters. Deduct door widths if you need to.
- Can it count ironmongery?
- Not directly. Use the door count with your ironmongery schedule.
- Does it measure kitchens?
- It gives unit run lengths where the plan shows the kitchen layout.
Measure your next joinery and carpentry job
Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.
Used for joinery and carpentry work across the UK
- Joinery and carpentry take-off in Bristol
- Joinery and carpentry take-off in Edinburgh
- Joinery and carpentry take-off in Belfast
- Joinery and carpentry take-off in Brighton
- Joinery and carpentry take-off in Oxford
- Joinery and carpentry take-off in Norwich
- Joinery and carpentry take-off in York
- Joinery and carpentry take-off in Bath
- Joinery and carpentry take-off in Inverness