Construction take-off services in the UK: outsource the measure or do it yourself?
Short answer: an outsourced take-off service is worth it for a large or unusual job you price once in a while; take-off software is usually better when you price drawings every week and want the quantities in minutes, under your own control. QuantRead is software, not a measuring bureau. This page sets out the trade-offs honestly so you can pick the right route for each job.
Try it free – 1 drawing, up to 3 pagesSee an example result
What a take-off service does
A take-off (or estimating) service is a person or firm that measures your drawings for you. You send the PDF or CAD files, they confirm a price, and they send back a spreadsheet or PDF of quantities, often with marked-up drawings. Most UK services quote a fixed fee per drawing or per project after looking at the drawings, and add a premium for a rush job. You still apply your own rates, waste and allowances.
What take-off software does
Take-off software lets you, or your estimator, do the measuring yourself. Traditional on-screen tools make measuring faster but you still click every line. AI take-off software such as QuantRead reads the drawing for you and returns lengths, areas and counts for your trade, with the scale it used and how each figure was worked out, so your time goes on checking rather than clicking.
Side by side
| Outsourced take-off service | AI take-off software (QuantRead) | |
|---|---|---|
| Cost model | Quoted per drawing or per project | Monthly plan with a drawing allowance; first drawing free |
| Turnaround | Usually agreed in working days, faster for a fee | Minutes for most drawings; leave the page and come back |
| Who checks it | The service, then you | You, with every line showing whether it was dimensioned, scaled, counted or assumed |
| Revisions | Often re-quoted | Upload the revised sheet and read it again from your allowance |
| Knowledge kept | In the supplier’s files | In your account, with the working on every line |
| Good for | One-off large, complex or multi-trade packages | Regular pricing, bid/no-bid decisions, checks and variations |
When a service is the better choice
- You need a full multi-trade bill of quantities measured to NRM2 and described properly.
- The drawings are poor scans, hand sketches or CAD files that need an experienced eye.
- You price this kind of job rarely and do not want to learn a tool for it.
- You need someone to stand behind the measure professionally.
When software is the better choice
- You price drawings most weeks and the measure is the bottleneck.
- You want a first figure in minutes to decide whether a tender is worth pricing.
- Drawings get revised and you need to re-measure fast.
- You want to keep control of the numbers and see exactly how each was worked out.
Using both
Plenty of estimators and QSs do both: software for the day-to-day packages and quick checks, and an outside measure for the occasional big job. A software first pass is also a quick way to sense-check quantities you receive from a subcontractor or a service. See how quantity surveyors, estimators and QA teams use QuantRead, or look at real sample take-offs.
Questions
- Is QuantRead a take-off service?
- No. QuantRead is software: you upload the drawing and it produces the take-off for you to check. Nobody at QuantRead measures your drawings by hand.
- How much does a take-off service cost in the UK?
- Services set their own prices, usually as a fixed quote per drawing or per project after they have seen the drawings. Ask for the price, the turnaround and what format you get back before you send anything.
- Can I use QuantRead to check a take-off I paid for?
- Yes. Read the same drawings for the trade in question and compare the totals. Big differences usually point to a missed sheet, a scale issue or a different measuring rule.
- Does QuantRead work for any UK city?
- Yes. It is online, so it works the same in London, Manchester, Glasgow, Cardiff or Belfast. See QuantRead across the UK.
Measure your next drawing in minutes
Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.
Take-off by trade
- Sealant and mastic
- Windows and doors
- Drylining and plastering
- Flooring
- Roofing
- Brickwork
- Electrical
- Plumbing and heating
- HVAC and ventilation
- Fire-stopping
- Tiling
- Joinery and carpentry
- Cladding
- Groundworks and drainage
- Painting and decorating