Anonymised case study

Testing AI take-off on real facade drawings

Anonymised example. This is based on our own October 2026 tests of the QuantRead reading engine for a specialist sealant contractor in the East of England. The contractor, the projects and the drawing numbers are not named. All figures below come from the test log; nothing is invented or rounded up.

The job

Sealant work is priced by the linear metre: frame perimeters around windows and doors, movement joints, panel joints. Measuring those off multi-storey elevations by hand takes hours per sheet. The test question was simple: can an AI reader produce the counts and metres from the drawings the contractor actually receives, and say honestly where it is unsure?

What we tested

Real tender and construction PDFs for several trades, in October 2026: facade elevations, floor plans, electrical and mechanical layouts. The sealant results below are from three facade elevations.

What matched

What did not match, and what we changed

Time

Successful test runs typically took about 3 to 16 minutes per drawing, mostly the AI reading large sheets at high resolution.

What this means

The 92.5% figure is one perimeter on one sheet, not a product-wide accuracy claim. What the tests show is that the reader gets counts and written dimensions right more often than not, shows its working, and flags the lines that need a person. That is what QuantRead is for: a fast, checkable first pass, not a replacement for your own measure.

Every result is an estimate: it states the scale used, the assumptions, a confidence per line and a “check on site” list. It is not a survey, a bill of quantities or a price.

See the anonymised resultTry a drawing free

Case Study: AI Sealant Take-Off vs Manual Measure | QuantRead