For FM and estates teams

Drawing take-off for facilities and property managers

Estates and FM teams look after buildings they did not design, often with a folder of old PDFs. QuantRead turns those drawings into areas, counts and lengths you can use to scope works and check contractor quotes.

Try it free – 1 drawing, up to 3 pagesSee pricing

Typical jobs

  • Floor areas by room for re-carpeting, cleaning or space planning.
  • Counts of doors, windows or light fittings for replacement programmes.
  • Wall areas for redecoration cycles.
  • Lengths of sealant joints, gutters or perimeters for planned maintenance.

Check quotes before you sign

If a contractor quotes 600 m² of flooring and the drawings show 480 m², that is worth a conversation. An independent first pass makes those differences obvious.

Old drawings

Scanned or older drawings can be harder to read. QuantRead tells you the scale it used and what it was unsure of. Always confirm on site: buildings change over the years and drawings are not always updated.

Questions

Can it read scanned drawings?
Often yes, if the scan is clear. It will flag anything it could not read.
Do I need technical training?
No, but someone who can read a drawing should check the results.

Measure your next drawing in minutes

Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.

Try it free – 1 drawing, up to 3 pagesSee pricing

More about QuantRead

Drawing Take-Off for Facilities & Property Managers | QuantRead