Windows and doors

Window and door counts, sizes and perimeters from your drawings

Pull a window and door schedule out of a set of elevations: every opening by type and tag, with sizes from the schedule or written dimensions, perimeter metres and glazed area. Curtain walling stays on its own line.

Try it free – 1 drawing, up to 3 pages

What QuantRead measures for windows and doors

  • Window and door openings by type and tag (W01, D-02 and so on)
  • Sizes from the schedule, written dimensions, or scaled from the elevation
  • Perimeter metres per type, and sides-and-head only for doors
  • Glazed area by type (m²)
  • Curtain-wall and glazed-screen bays kept separate

Profile in the app: “Glazing / windows”. Every result also shows the scale used, how each line was measured, and a check-on-site list.

Elevations plus the schedule gives the best result

If the window schedule is on the same sheet or in the same PDF, QuantRead matches tags to sizes. Where there is no schedule, sizes are scaled from the elevation and marked with their confidence. A door too small to scale reliably is given an assumed size and flagged, never quietly guessed.

Before you order frames

A take-off from drawings is for pricing. Survey the openings on site before you order anything made to measure. Every result ends with a check-on-site list for exactly this reason.

Worked example (illustrative)

Four elevations of a block of flats show 18 × W01 (1,000 × 1,200 mm), 12 × W02 (600 × 1,200 mm) and 4 × D01 (900 × 2,100 mm).

TypeCountPerimeter eachTotal perimeterGlazed area
W01184.4 m79.2 m21.6 m²
W02123.6 m43.2 m8.64 m²
D01 (sides and head)45.1 m20.4 mn/a

Windows and doors take-off questions

Can it tell casements from fixed lights?
Where the elevation shows the opening lights or the schedule names the type, it splits them. Otherwise they share a type and you can rename lines after the read.
Does it read rooflights as windows?
Rooflights are counted under roofing, not windows, so they are not double counted.
Can I export the schedule?
Yes, on paid plans you can export CSV or a PDF report of the counts and sizes.

Measure your next windows and doors job

Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.

Try it free – 1 drawing, up to 3 pagesSee pricing

Used for windows and doors work across the UK

Who uses windows and doors take-off

Other trades

Window & Door Schedule from Drawings | QuantRead