Quantity take-off software for Portsmouth trades and estimators
Portsmouth is one of the most densely populated cities in the UK, with tightly packed terraces on Portsea Island. Building up into the loft is a common way to add space, and QuantRead measures the drylining.
Try it free – 1 drawing, up to 3 pages
Building work in Portsmouth
Portsea Island is covered with Victorian and Edwardian terraces, especially in Southsea and Fratton, so loft conversions, rear extensions and HMO conversions are common work.
Regeneration such as the Tipner and city-centre schemes is planned to add new homes, and the naval base keeps marine and defence work in the area.
Trades in Portsmouth that use it most
Worked example: dormer loft conversion drylining (illustrative)
| Line | Working | Qty |
|---|---|---|
| Flat ceiling | measured | 22.0 m² |
| Sloping ceilings | 2 × 5.0 × 2.2 | 22.0 m² |
| Knee walls | 2 × 5.0 × 1.2 | 12.0 m² |
| New partition, both faces | 8.0 × 2.4 × 2 | 38.4 m² |
| Total board area | 94.4 m² | |
| Boards (2.88 m² each) | 94.4 ÷ 2.88 | 33 nr (32.8 rounded up) |
Figures are an example of the arithmetic, not from a real Portsmouth project. Always check against the drawings and on site.
Questions from Portsmouth
- Can it measure sloping ceilings?
- Where a section shows the slope, sloping ceiling areas are measured. If not, they are flagged.
- Is one drawing enough for a loft conversion?
- Usually a plan and a section are enough, which fits in one upload.
- Do I need to be in Portsmouth to use QuantRead?
- No. QuantRead is online software with no local office. Portsmouth contractors use it the same way as anyone else in the UK: sign up, upload a PDF and get the take-off in the browser.
Price your next Portsmouth job faster
Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.
Nearby
Who uses it in Portsmouth
Quantity surveyors, estimators and QA teams in Portsmouth use the same online tool as trades: a first measure for cost plans and tenders, a quick check on someone else’s quantities, or counts to plan inspections. Comparing with paying for a measure? See take-off services vs software.