Trade guides

How do you work out a roof area from plans?

Short answer: Measure the roof area on plan, find the pitch on a section or elevation, then divide the plan area by the cosine of the pitch. For a 35° roof, divide by about 0.819, so 80 m² on plan is about 97.7 m² on the slope.

Pitch factors

Pitchcos(pitch)Multiply plan area by
15°0.9661.035
22.5°0.9241.082
30°0.8661.155
35°0.8191.221
40°0.7661.305
45°0.7071.414

This works for any roof where all slopes share the same pitch, including hipped roofs. If slopes have different pitches, work each slope separately.

Linear runs

  • Ridges and eaves: measure on plan. They are horizontal, so plan length is true length.
  • Verges: plan length ÷ cos(pitch).
  • Hips and valleys: these run diagonally on a slope, so plan length is not true length. Work them out from the geometry or measure on a roof plan with the true lengths given.

Worked example

A 10 × 8 m gable roof at 35°: plan 80 m², slope 97.7 m², ridge 10 m, eaves 20 m, verges 4 × (4 ÷ 0.819) = 19.5 m.

See the roofing take-off, which reads the pitch from your section and flags the slope area if no pitch is shown.

Tags: roofing, roof area, pitch

Let QuantRead do the measuring

Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.

Try it free – 1 drawing, up to 3 pagesSee pricing

Related posts

All posts · FAQ · Take-off by trade

How do you work out a roof area from plans? | QuantRead