Trade guides
Working out materials for a single trade from a drawing.
How do you measure mastic and sealant from drawings?
Measure sealant from elevations: window and door perimeters, movement and panel joints in metres, then convert metres to cartridges by joint size.
13 November 2026 · 2 min read
Trade guidesHow many bricks do I need? Working it out from drawings
Work out bricks from drawings: measure net wall area less openings, then use about 60 bricks per m² (half-brick wall) or 10 blocks per m².
13 November 2026 · 2 min read
Trade guidesHow much plasterboard do I need from the drawings?
Calculate plasterboard from drawings: wall and ceiling areas less openings, times faces and layers, divided by 2.88 m² for a 2,400 × 1,200 mm board.
13 November 2026 · 2 min read
Trade guidesHow do you work out a roof area from plans?
Work out roof area from plans: divide the plan area by the cosine of the pitch to get the slope area. Plus ridges, hips, valleys, eaves and verges.
13 November 2026 · 2 min read
Measure your next drawing in minutes
Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.