Guides

How do you read construction drawings?

Short answer: Start with the title block: project, drawing number, revision, scale and paper size. Then work out what type of drawing it is (plan, elevation, section or detail), read the legend for the symbols, and trust written dimensions over anything you scale. Cross-check plans against elevations and sections, and always use the latest revision.

Start with the title block

The box in the corner tells you the project, the drawing number, the revision letter or number, the scale (for example 1:50 @ A1), who drew it and the date. Check the revision against the drawing register or the latest issue sheet before you take anything off it.

Know which view you are looking at

DrawingWhat it showsWhat you take off it
PlanThe building from above, cut at about 1 mRoom sizes, wall lengths, doors, floor areas
ElevationOne face of the buildingWindows, facade areas, heights
SectionA slice through the buildingFloor-to-ceiling heights, build-ups, roof pitch
DetailA junction at large scaleHow things fit together, specific products
ScheduleA table, not a drawingWindow, door and finish types and sizes

Read the legend and the notes

Symbols for sockets, lights, fire doors and drainage vary between practices, so always read the legend. Notes on the drawing often carry information that is not drawn, such as “all partitions to be 100 mm stud unless noted”.

Dimensions beat scaling

Use the written dimensions wherever there are any. If you must scale, check the scale first against a written dimension, as explained in How do you scale a PDF drawing to measure it?. Many drawings carry a note saying “do not scale”, which means the designer will not stand behind a scaled figure.

Cross-check between sheets

A window on the elevation should appear on the plan and in the schedule with the same size. If they disagree, raise a query rather than guessing: that is how missed items and extras are avoided.

Getting the numbers out

Once you can read the drawings, the take-off is the next step: see How do I do a take-off from PDF drawings?. QuantRead reads the title block and measures for your trade, but it is still worth knowing how to check what it found.

Tags: reading drawings, title block, scale

Let QuantRead do the measuring

Upload a PDF, pick your trade, and get an editable take-off with the scale used and a check-on-site list.

Try it free – 1 drawing, up to 3 pagesSee pricing

Related posts

All posts · FAQ · Take-off by trade

How do you read construction drawings? | QuantRead